Product Details:
Payment & Shipping Terms:
|
Plastic Injection MoldSolder mask is exposed to the pads used, it is often said that the green oil, oil is actually digging holes in the green, the green oil does not need to cover the pads and other exposed areas. Proper cleaning can get a suitable surface features. HASL solder coating HAL (commonly known as HAL) process is first dipped on the PCB flux, then dipping in molten solder, and then |
Product Name: | 3 Axis Robotic Arm | Max. Load: | 5 Kg |
---|---|---|---|
Servo Motor: | Panasonic | Application: | Picking And Placing |
Precision: | +-0.1mm | Control System: | PLC |
Standard: | CE | ||
High Light: | pick and place robot,injection moulding robots |
3 Axis AC Servo Industrial Robotic Arm For Plastic Injection Molding Machines
Introduction
Three Axis AC Servo Driven Robots are extensively applied to horizontal plastic injection machines from
60T~2800T which are mainly designed for rapid and precise removal on strict demands of good
appearance of finished products and spruces.
There are two types of arms – single stage and telescopic.
The vertical strokes for single stage are 700/800/900 and for telescopic are 800/900/1000/1100/1300/
1500/1700/2000mm.
Full AC servo motors are driven on three axis (traverse /crosswise /main arm), take-out at super high-
speed 1.4 sec and dry cycle time within 5.6 seconds.
All linear movement are controlled by servo driven control systems to cooperate with high rigidity structure
of linear guide rail for realizing high precise take-out and accurate repeatability.
Standard Function
Packaging Point 1~256
Packaging Motion Up to 200
Ejector Link
Defective Product Reject Circuit
Posture Control during Traverse
Posture Midway at Release Side
Products Confirm in Chuck
Vacuum Sensing Circuits 1
Midway Runner Release
Crosswise Product Extract Posture 1
Crosswise Product Extract Posture 2
Delayed Arm Descent
Extract at Fixed-side
Delayed Traverse
Free Crosswise Servo
Posture Control during Descent
Runner Release within Mold
Module Memory (50 min)
Conveyor Even Moving
Optional Function
Air Nipper in Chuck
NT Gate Cut
Vacuum Sensing Circuits 4
Releasing Products at 2 Different Points
Products Confirm
Specifications:
Model |
Stroke(mm) |
Max. power con- sumption |
Weight (Kg) |
Air con- sumption |
precision |
Voltage |
Driven system |
Working air pressure |
||||
Main-arm |
Sub-arm |
Cross- wise stroke |
traverse |
KW |
Main body |
Max. Load NL |
NL/ cycle |
|||||
MDW-80 |
800 900 1000 |
---- |
620 |
1400 1600 |
2.1 |
359 |
5 |
472 |
-0.1~+0.1 |
AC220 50/60HZ |
AC servo driven motor |
0.5~ 0.7MPa |
MDW-80S |
850 950 1050 |
570 |
3.5 |
397 |
482 |
|||||||
MDW-110 |
1100 1300 1500 |
---- |
1160 |
1800 2000 |
5.7 |
518 |
10 |
982 |
||||
MDW-110S |
1150 1350 1550 |
1000 |
8.2 |
552 |
992 |
|||||||
MDW-170 |
1700 2000 |
---- |
1500 |
2500 3000 |
7.6 |
1563 |
25 |
63 |
||||
MDW-170S |
1750 2050 |
1300 |
9.8 |
1656 |
63.5 |
Robotic Arm Application
Contact Person: admin